Caring For Your Plotter

The price of plotters has decreased significantly over the last few years. Yet you will not throw away a plotter when it malfunctions. Rather you would try to find a fix to the problem while trying some do-it-yourself steps. This is the way you make proper use of your investment. Smaller problems can be sorted or prevented with little care, and then you will not have to call a same day plotter repair service in a hurry. But if you see that the plotter is actually facing serious printing issues, and the printing paper and ink cartridges are just wasted, then you will have to call a technician who offers services of expert plotter repairs. Until then, the few preventive measures should be taken care of.

The head will wear off if kept inactive

Do you often leave the plotter printing machine idle, or powered off, just because it’s not needed to be used frequently? If that is the case, then you are simply inviting trouble for the plotter head. The head will wear off much before it’s time due to such inactivity.

The head is that part of the plotter, which prints the impressions on the paper. And if the head is damaged or blocked, then it will not print anymore, or print scratchy lines or illegible blobs of inks on the paper. To avoid the problem, the head should be prevented from blockage. And the best way to do that is keeping it active. Even if you do not have any printing job, you must do a test print every week, so that the printer is in an active state. This ensures that the head nozzles do not get blocked from the dried ink.

Sometimes the head may break too, and then no preventive measure will work. Whatever is the case, a slow corrosion, breakage or blockage, once the head actually is damaged, it will need a replacement.  Every plotter demands it at some point of time. It is then that you will have to call the technicians who offer expert plotter repairs, and thankfully repairing plotters in Sydney is no pain these days. Read more at Printer repairs

Don’t neglect paper jam issues

 A great way to keep off plotter repairs technicians, and take care until a major issue happens is by checking the paper input and paper jam issues. Often it goes unnoticed that a paper jam can rip off the head and damage it when the jammed paper is tugged and pulled with inexperienced hands. While lots of people handle a printer in the office, you will be not able to check every operating hand, but you can certainly check the paper quality. A good quality paper, thick enough to smoothly pass through the roller and not get stuck is a good choice. It will not get folded or get stuck normally. If a brutal jam occurs, do not take chances by pulling or tugging. Without risking the fragile internal parts, you should then call expert plotter repairs technicians. Nowadays, the cost of plotter repair has also come down, making it much affordable without much ado.

Leave a reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>